Need Netgear Router Technical Support Phone Number? Find Here Information

The wireless routers of Netgear are very popular all over the world. These are used by millions of people and sold in millions every year. Due to easy setup procedure and instant accessibility Wi-Fi routers of Netgear are highly demanded in the market.

The front panel of the router possesses status lights in the following order:

• The internet connection light.

• Wi-Fi connection light.

• The LAN ports lights (4 nos).

• WPS cable device connection light.

The user needs to properly position the router to air the signal all over the place consistently. The best way to keep the router is in slightly elevated position so that the devices get a clear signal. It is not feasible to keep it far away from the AC cable connection, but it should be kept away from the other electrical devices or gazettes.

After the proper placement of the router, following steps are to be followed:

• The router is to be connected to the modem and computer.

• Every router comes with a setup wizard CD disk. This disk is to be used to install and setup the router. Most of the steps will happen automatically and the entire process will require a few minutes.

• The user needs to enable wireless security for the network.

Thus, the wireless router will be ready to use all across the network. The other computers and devices will be required to put the password once to enjoy permanent access to the wireless network. If you have any issue with Netgear router then contact to Netgear router customer support number round the clock!

Accessing the Netgear router means using the router seamlessly within the network. For this, the users will be required to put the correct password.

Access to netgear router process involves three steps:

• The user needs to open the browser that he uses on his computer or mobile device.

• Then, he needs to type Link1 or Link2.

• when a login window will open.

• The user needs to put the user id and password

Now you can easily access your Netgear router by your User ID and Password. If there is any trouble while accessing the router then contact to Netgear router customer service number and netgear router help desk for immediate and reliable support.

Netgear updates Netgear router firmware on a regular basis. So, it is necessary for a user to upgrade the firmware in the following manner.

• The user needs to launch the web browser from his computer or any Wi-Fi device that is linked to the network.

• The user now needs to enter the address of login panel of netgear. From the web browser.

• The user now needs to enter the username and password of the router by default the username is “Admin” and password is “password”. It should be kept in mind that the username and password are case sensitive.

• The user now needs to select “Administration” from the “advanced” option. Here, the user will find the firmware update button. The level of the button may also show its name as “Router update button”.

• In this step the will have to click the “Check” button. At this point, the system will find out the new version of the firmware, if available. The user will have to click on the “Yes” button to download the new version.

The experts in this field always recommend using an Ethernet cable to connect the computer and the router while updating the firmware. If you face any troubleshooting issue in your router then try to figure out by yourself first if it will not work out then contact to netgear router technical support department for assistance in your hardware!

Following is the process of configuring Netgear router with cable connection with the smart wizard.

• The modem is to be connected to the internet port of the computer and any one of the LAN port in the router.

• Computer, the router, and the modem are to be switched on, the booting up process will take some time.

• The user now needs to access the router through. website http://192.168.0.1 or http://192.168.1.1 and then put the user id and password to login.

• Now the user needs to login to the setup wizard and follow the instructions step by step and click on the “Next” option to navigate to the next window.

It will take some time to complete the configuration and use the router flawlessly across the network. If you have issue with that then contact to netgear router help desk phone number!

Many time due to unavoidable circumstances, you need to uninstall your routers. Following are the steps to remove or uninstall Netgear router with the help of Netgear genie.

• The user needs to open Netgear Genie and go to the Wi-Fi connection and then he needs to select “Manage”.

• A list of available networks will be visible; the user needs to select the network he wants to remove.

• The system will finally confirm whether the user wants to remove it or not. Ion clicking “Yes”, the network will be deleted permanently.

If you found issue while removing and uninstalling netgear router from the computer system then contact to netgear router tech support number for remote assistance and reliable help from the experienced technicians in routers!